This kit features a laydown machine used for easily laying pipe down to bedrock, and a pre made pumpjack to place down once your pipes have been placed, allowing for extremely quick assembly of oil wells for the Create Diesel Generators Mod.
Estimated Required Inputs Per Hour:Laydown Machine: 4 Stress Units x RPMPumpjack: 16 Stress Units x RPMEstimated Outputs Per Hour:~ Oil x RPMRequired Mods:The Create ModCreate Diesel GeneratorsLinking to Your Network:1. Connect the frogports to your chain conveyor system.2. Link the stock link located on the output packager to your network.3. Use factory gauges, restockers, or signs to route items to their respective input frogports located on the front, labeled by signs to let you know what to assign to the input.
Setup Guide:1. Place your laydown machine in the oil rich chuck identified by using a oil scanner.2. Give a few stacks of pipes to the barrel. (This amount needed will vary based on how far you are above bedrock)3. Apply rotational power to the rope pully and leave the machine to drill down to bedrock.4. Once its made it to bedrock invert the rotational power. (Its recommended to keep it under 128 rpms to make sure it doesn't miss placing a pipe on its way back up)5. Remove the laydown machine and place your pumpjack with the pumpjack hole located above the pipe.6. Right click the pumpjack bearing to assemble the pumpjack then apply rotational power to the pumpjack at any speed.7. Now setup your pipes to pump out oil to its next location.Notice: Here is a build to allow you to convert your oil into crude oil buckets to allow for buckets-based post production transportation: LinkTroubleshooting:Machine made on Create v6.0.10, Minecraft Snapshot 1.21.1, NeoForgeMachine tested on Create v6.0.8, Minecraft Snapshot 1.20.1, ForgeMachine tested on for Create v6.0.8, Minecraft Snapshot 1.20.1, Fabric