👋 Hey friends!
📚 This post includes everything important in one place:✅ Downloads✅ Switch info✅ Print settings✅ A few extra tips that might save you some frustration later
⏬ DOWNLOADS
📦 WELCOME PACK – See what’s included in your starter pack LINK.🗓️ CURRENT MONTH (July) – Fresh new designs waiting for you.📁 PREVIOUS MONTH (June) – Missed last month’s files? They’re right here.
ℹ️ INFO
🔘 SWITCH INFO & WHERE TO BUY – Full assembly guide, recommended links, and everything you need for perfect clicks.💸 MEMBERS’ DISCOUNT CODE – Get 50% OFF on older archived designs.
⚙️ PRINT SETTINGS
• Nozzle: 0.4 mm• Layer Height: 0.2 mm• Outer Wall Width: 0.4 mm• Wall Generator: Aracne (Face-down orientation)• Walls: 3• Infill: 10–15% (Gyroid or Adaptive Cubic)
💡 Pro tip:My keycaps are designed for a tight fit — they snap onto the switch stem without glue.If it’s too tight, lower your filament flow ratio (around 0.92 works well, depending on filament color/brand).If it’s too loose, increase the flow slightly.
🎨 FILAMENT
Any brand of PLA filament will work for you..Colors used are listed in each design post.
🧠 Remember: these designs look good, click great, and usually make someone else say:
“Hey, can you print one for me too?” 😉