The Dragon Page Keeper is an illuminated dragon in a cape reading an open book, designed to sit right on top of an LED tea light https://a.co/d/edgb6Xs or an RGB puck light https://a.co/d/dZVWg0A
I also made a larger version for a plug-in LED puck light (There are many options of these types of lights out there. Just know the opening is 63mm) https://a.co/d/1CJ61HP
This model comes in two sizes:
Small (38mm opening) – fits 1.4inch LED tea lights.
Large (63mm opening) – scaled up with adjustments to fit brighter LED puck light.
I recommend printing in a single light or translucent filament to maximize the glow. For the larger version, I finished it with gold, silver, and black Rub ‘n Buff, and the results were stunning!
This model was heavily requested after the Pumpkin Page Keeper release, and I think this dragon version will be a perfect addition for book lovers and fantasy fans alike!
Print Settings
Walls: 2
Infill: 5% gyroid
Supports: Strong Tree supports on (critical regions only)
Layer Height: 0.20 mm
Filament Usage & Print Times (Bambu Lab A1 tested)
Small Version (38mm LED slot)
Single Color: ~111g | 8 hrs
Multicolor (4 colors): ~393g | 29.5 hrs
Can reduce to 3 colors if removing the white book page layer
Best printed in batches to save time and filament
Large Version (63mm LED puck slot)
Single Color: ~315g | 18.5 hrs
I did not color the large version because it would take several days and far too much filament
Let me know what you think!
Happy printing,
Christian, @CraftyKid3D