hi!! Happy Monday!!
To start the month off I wanted to share this double release: spooky pack of clickers and another catch all dish!
For all those that have been following my journey here on patreon you can download the ghost catch all dish free on thangs! click here to hop over to my thangs page
Youtube shorts ⬇️
👻 Ghost Catch all dish 👻
3 walls, 15% gyroid or 3D honeycomb infill, support free
tested down to 50% and up to 120%
Don't rotate the model from the way it loads on the plate. It is important to have the inner incline to be facing the fans for extra cooling
I've included glue in version, and a combined 3MF
Editing 3MF
Avoid using the slicer's fill tool when coloring eyes, and cheeks in the combined 3MF file, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects.
Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.
🕸️ Spooky Clicker pack 🕸️
3 walls, 15% gyroid or 3D honeycomb infill, support free
I get my Switches (the part that clicks) from amazon. The listing is from Canadian amazon: Kailh box Jade switches
I recommend putting your keychain chains in first before assembling the clicker
Depending on your tolerance you may find the switch to be too loose or too tight, I recommend scaling 0.5% down or up to make for a better fit. Adding a tiny bit of superglue to the base and to where the switch connects is also another way to secure the clickers. Careful as to not glue the switch shut.
Cutting the metal tabs on the bottom of the switch is not necessary but if you are not gluing in the clickers i do recommend carefully removing them as they are sharp.
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
+++ You can grab these files from the current download post +++
✨✨-----> Current download post <-----✨✨
👻👻👻